The following products are mainly obtained from Radiata Pine forests, depending on its quality, diameter and length. These are trimmed sawed round wood, industrial and pulpwood logs.
Trimmed sawed round wood logs
These ones come from trees that was trimmed at an early age, making it able to benefit from knotless wood, to be used in the production of veneer sheets and wood-based panels. These should be fresh, straight, stainless, without bumps, free from branches or knots of any kind. They are commercialized from a minimum diameter of 28 centimeters.
Industrial sawed round wood logs
They derive from trees or from parts of trees which have been not trimmed. It is possible to get wood to be used in construction, higher value-added products and processing, mainly such as moldings, furniture parts and components. These should be fresh, straight, stainless, without bumps, free from branches and removed cut-off knots from branches. They are commercialized from a minimum diameter of 16 centimeters.
Pulpwood round wood logs
These ones are round wood logs that are intended for the pulp industry. They are commercialized from a minimum diameter of 8 centimeters. They come from the management of forests and harvesting. Their main length production is 2.44 meters.
Eucalyptus Globulus and Eucalyptus Nitens pulpwood logs
They are marketed round wood logs with and without bark, from a diameter of 8 centimeters, its lengths are 2.44mts.; 3.50 mts. and 7 mts. Deriving from harvest and are used mainly for pulp.
Pulpable logs of E. glóbulus and E. nitens for the national market
They are logs that are marketed with and without bark, from a diameter of 8 centimeters, in lengths of 2.44; 3.50 and 7 meters. They come from the harvest and are mainly used for the production of pulp.